Heavy Load RUWL Programmable Turntable with USB & Wi‑Fi for 3D Scanning

Description

1) The RUWL Heavy Load Series: Programmable Turntables for Products Other Decks Cannot Carry

The ComXim RUWL heavy load series exists for one job: rotating products that stall ordinary turntables. This dedicated link gathers the two large-platform models of the family, with deck diameters of 19.7 and 23.6 inches and load ratings of 440 lb (200 kg) in step mode and 700 lb in continuous mode. Furniture, large appliances, sculptures, prosthetic devices and automotive assemblies sit securely on deck while the platform runs a slow, programmable rotation for 3D scanning, inspection or showroom display. Compare the two platform sizes side by side and pick the one that fits your product — ratings, control system and software are identical across the link.

2) When Ordinary Turntables Stall Under Real Product Weight

• Capacity that matches the catalog — Compact decks bog down or wobble under furniture, packed luggage or appliances, and the wobble ruins every 3D scanning pass. The RUWL series carries 440 lb in step mode and 700 lb continuously, so the platform stays flat and repeatable at every angle.
• Industrial ratings, bench-top setup — Industrial rotators with this capacity usually demand PLC integration, custom fixtures and an engineer on site. The RUWL series plugs straight into a laptop over USB or joins a phone over Wi-Fi — no gateway, no router, no integration project.
• Manual repositioning breaks repeatability — Heavy products get repositioned by hand between frames, which is slow and never quite repeatable. Programmable rotation keeps angle, speed and pause time identical on every pass.

3) What the RUWL Heavy Load Turntable Does for Your Workflow

• Heavy ratings in both modes — Step-mode ratings run to 440 lb (200 kg) and continuous-mode ratings to 700 lb, so a fully loaded deck rotates smoothly whether it is creeping between scan frames or looping for a showroom crowd.
• Slow, repeatable motion control — Rotation speed is programmable from 34 to 90 seconds per revolution, with five programmable rotation modes plus adjustable direction, angle and pause time — slow enough for frame-exact scanning, steady enough for all-day display.
• Three control methods — An infrared remote for the studio floor; USB to Windows software and a web console; and Wi-Fi in access-point mode, where the turntable creates its own network so phones and tablets join with no router. CT commands for custom rigs travel over USB or Wi-Fi.
• Black or white to match the set — Every model ships in black or white, so the deck recedes against dark stages or light sets instead of competing with the product on it.

4) Where a Heavy Load Turntable Earns Its Keep

• Large-product 3D digitization — Furniture, appliances, luggage, helmets, mannequins, sculptures, prosthetic devices and automotive parts — the deck pauses at each programmed angle while a laser scanner or measurement arm captures, then moves on.
• Hands-free heavy-product display — Showrooms and retail floors run a continuous 34–90 second loop that turns a heavy product smoothly without staff touching it.
• Repeatable positioning for capture and QC — Stop-motion capture and inspection rigs that need a heavy object to hold an exact angle between frames, pass after pass.
• All-day stage duty — Trade-show and studio stages where a black or white deck has to carry serious weight all day without drama.

5) Why Choose the RUWL Heavy Load Series

• Industrial capacity without the integration project — Most high-capacity rotators are factory equipment: hardwired, integrated, expensive. The RUWL series keeps industrial ratings on a plug-and-play platform — USB straight to a laptop, Wi-Fi straight to a phone.
• One control system across the family — The control experience is shared with the rest of the ComXim programmable turntable family, so a team that starts heavy can add compact decks later without relearning anything.
• Pick the size, keep the system — Two platform sizes on one link make selection simple: compare the decks side by side and pick the size that fits the product, with identical ratings and software either way.
• Clear scope, no surprises — Honest scope: this series focuses on rotation. Camera auto-shutter output lives on the RUWPSL series and platform weight sensing on the T-series, so you always know which model does which job.

6) Frequently Asked Questions

Q: Which RUWL size should I choose for my product?

A: Pick a platform diameter comfortably larger than the base of your product. Both models on this link share the same ratings — 440 lb (200 kg) in step mode and 700 lb in continuous mode — so the choice comes down to deck size: the smaller platform suits large single products, the larger one adds clearance for wide or irregular bases.

Q: How heavy is heavy load, exactly?

A: The series is rated for 440 lb (200 kg) in step mode and 700 lb in continuous mode, with programmable rotation from 34 to 90 seconds per revolution. That covers furniture, large appliances, packed luggage, sculptures and most industrial samples a studio or workshop handles.

Q: Does this turntable trigger my camera shutter automatically?

A: No. The RUWL heavy load series has no camera auto-shutter output — it focuses on programmable rotation with remote, USB and Wi-Fi control. For models with an automatic SLR shutter synced to step rotation, see the ComXim RUWPSL series.

Q: Does the RUWL series support weight sensing?

A: No. Weight sensing belongs to the ComXim T-series models, which add a load sensor to the platform. The RUWL line focuses on heavy-load programmable rotation; if you need the platform to report the load on it, choose the corresponding T-series model.

Q: Can I control the turntable from my phone without a router?

A: Yes. The Wi-Fi works in access-point mode — the turntable creates its own wireless network that your phone joins directly, so control works in warehouses, workshops and on-location sessions with no internet or router required.

Q: Can I write my own software to control the rotation?

A: Yes. ComXim publishes the CT command list and offers source-code demos for Windows and Android. Commands can be sent over USB or Wi-Fi, so the turntable integrates into automated scanning cells, robotic stages and custom scripts.